PAX soft close hinge reinforcement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If your PAX closet door has damaged screw holes, this can help.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial
I have a PAX closet with soft-close doors. Two of the doors got damaged from some bursts of wind, as the screw holes the hinge screws into the closet with no longer held screws correctly.
I designed this to fit exactly over those soft-close hinges.
The space allowed for this is very tight, leading to a few very thin walls. A better designer might be able to fix this, but I am not that designer, and so the walls might not look good. Luckily they're also nearly impossible to see.
I don't know how old these closets are. Your mileage may vary.
I printed this in PETG with 4 walls and 25% infill. The holes are set up for 3.5x25mm screws - I used self-tappers but pre-drilled the holes a little with a thin drill bit.