PAX soft close hinge reinforcement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If your PAX closet door has damaged screw holes, this can help.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 4
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial
I have a PAX closet with soft-close doors. Two of the doors got damaged from some bursts of wind, as the screw holes the hinge screws into the closet with no longer held screws correctly.
I designed this to fit exactly over those soft-close hinges.
The space allowed for this is very tight, leading to a few very thin walls. A better designer might be able to fix this, but I am not that designer, and so the walls might not look good. Luckily they're also nearly impossible to see.
I don't know how old these closets are. Your mileage may vary.
I printed this in PETG with 4 walls and 25% infill. The holes are set up for 3.5x25mm screws - I used self-tappers but pre-drilled the holes a little with a thin drill bit.