1 / 4
"Firehose" 4-6mm PTFE tube adapter for PolyDryer — zdjęcie 1
1 / 4

"Firehose" 4-6mm PTFE tube adapter for PolyDryer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

It is a firehose looking PTFE tube adapter for the PolyDryer drybox

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
43
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Share Alike

This is a PTFE tube adapter I made for Polimaker's PolyDryer, it connects the 6 mm tube to a 4mm tube.

It's an easy push to fit assembly, while in the file the materials are set to PLA I would recommend PETG instead.

If the PETG is printing stringy you have to use a 6mm drill to clean up the inside tube.

Tagi