1 / 4
3U Rackmount for UPS in the KWS Rack v.2 by Ilan Kushnir — zdjęcie 1
1 / 4

3U Rackmount for UPS in the KWS Rack v.2 by Ilan Kushnir

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

this is a changed 3U Rack mount designed to hold a original UPS

Ocena
0 / 5
Polubienia
2
Pobrania
5
Wydruki
0
Wyświetlenia
221
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Public Domain

this is still a Prototype and has not been tested yet. Currently Im not able to say if it works or not. 
The Holes in the top and bottom strengthener are meant to be used with inserted threads. I recommend M6 x5 mm inserts 
Also the Holes for the Mount to the bottom of the Rack (in the Picture) is meant to use a threaded insert M6 x8 is the depth of the hole 
the Model of the Unit can be easily mirrored and used for all corners - this is also possible for the Bottom.
I think the Proper way to install this into your rack would be to insert the UPS into the 3u mounts - screw them together that its together and add it onto your Rack 
To be able to edit the parts I added the .step down below

Tagi