3U Rackmount for UPS in the KWS Rack v.2 by Ilan Kushnir
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
this is a changed 3U Rack mount designed to hold a original UPS
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 221
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
this is still a Prototype and has not been tested yet. Currently Im not able to say if it works or not.
The Holes in the top and bottom strengthener are meant to be used with inserted threads. I recommend M6 x5 mm inserts
Also the Holes for the Mount to the bottom of the Rack (in the Picture) is meant to use a threaded insert M6 x8 is the depth of the hole
the Model of the Unit can be easily mirrored and used for all corners - this is also possible for the Bottom.
I think the Proper way to install this into your rack would be to insert the UPS into the 3u mounts - screw them together that its together and add it onto your Rack
To be able to edit the parts I added the .step down below
