Blast Gate HT50 male to Hose 38
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You can insert the blast gate into an HT socket and connect a 38 mm hose to the other side.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 62
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Thanks to Runfrcover and Franz Josef for the great blast gate.
I attached an HT50 male pipe connection on one side and a 38 mm hose connection on the other. You can also combine two HT50 connections or two hose connections. I enlarged the holes in the spacer to 3.3 mm and added locking tabs on both sides for the slide's end positions. I also reduced the thickness of the spacer and the bushing to 3.65 mm to minimize play. For the spacer, I recommend PETG due to its spring-like properties and a smooth printing plate for all parts.
Assembly:
For the three small holes, you can screw M3x12 screws directly into the material; to do this, drill one side out to 3 mm. An M6x16 screw with a nut goes into the socket side.
My compatible extraction parts: