Blast Gate HT50 male to Hose 38
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
You can insert the blast gate into an HT socket and connect a 38 mm hose to the other side.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 62
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Thanks to Runfrcover and Franz Josef for the great blast gate.
I attached an HT50 male pipe connection on one side and a 38 mm hose connection on the other. You can also combine two HT50 connections or two hose connections. I enlarged the holes in the spacer to 3.3 mm and added locking tabs on both sides for the slide's end positions. I also reduced the thickness of the spacer and the bushing to 3.65 mm to minimize play. For the spacer, I recommend PETG due to its spring-like properties and a smooth printing plate for all parts.
Assembly:
For the three small holes, you can screw M3x12 screws directly into the material; to do this, drill one side out to 3 mm. An M6x16 screw with a nut goes into the socket side.
My compatible extraction parts: