USB power adapter for 2 jump wires
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
USB power adapter for 2 jump wires. Connect breadboard jumpers directly to USB power without soldering or extra boards.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 171
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Tired of cluttering your workbench with bulky breakout boards just to power a simple prototype? This compact, custom-designed USB power adapter block solves that exact problem. It allows you to seamlessly route 5V USB power directly to two standard electronic breadboard jump wires. The model features a snug, slide-in guide slot with polarity indicators to safely secure your connectors and maintain a stable, clean connection for all your DIY electronics and micro-soldering test projects.
3D Printing Parameters:
Technology: FDM
Recommended Filament: PETG or ABS (for durability and heat resistance near electronics), PLA (for quick testing)
Layer Height: 0.2 mm
Infill: 15% - 20% (Grid or Gyroid)
Supports: No
Brim/Raft: No (Ensure good bed adhesion)
Post-Processing & Assembly Tip:
No additional hardware or gluing required. Simply insert your bare wires or connector terminals into the designated positive (+) and negative (-) terminal slots. If the fit is too tight due to slight printer tolerances or elephant's foot, a quick pass with a small needle file or a hobby knife will ensure a perfect, flush glide.