Zombie Mechanic
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Zombified Mechanic, Dead and still grinding to get his work done. Produced with the help of AI.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
Here is a Zombie Mechanic. ready to print.
I printed with a 0.6 nozzle, just because that's where I do most of my work, and I keep these small figure prints for time wasters, I think they are fun, but my detail dropped of due to the larger nozzle size.
I would recommend a 0.4 or smaller if you want great detail, Low wall count, low infill doesn't need any great amount of specific settings. Supports are a necessity.
Model feet are not quite level to the upright figure. If you want to have it stand up properly, I suggest cutting off the bottom at least 0.5, I printed mine with about 0.9 cut off the feet, just to give a nice flat surface, I'm not going to be looking for detail in the bottom of the boots.