1 / 3
Apertura AD8 DobsonDream Tension Knob Adapter — zdjęcie 1
1 / 3

Apertura AD8 DobsonDream Tension Knob Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement tension knob for Apertura AD8 telescopes using a DobsonDream DSC encoder.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
26
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Apertura AD8 DobsonDream Altitude Tension Knob

This is a replacement altitude tension knob I designed for my Apertura AD8 Dobsonian after installing a DobsonDream DSC (Digital Setting Circles) encoder system.

Why I made this

The DobsonDream altitude encoder installation uses the same area as the AD8's original altitude tension hardware. There is very little clearance between the encoder, mounting hardware, and side of the telescope, making it difficult to retain a functional tension knob.

I wanted to keep the DobsonDream installed without losing the ability to adjust the telescope's altitude tension, so I designed this replacement knob specifically around the available space.

After several prototypes and measurements of the original hardware, this version fits my AD8 properly, clears the DobsonDream encoder assembly, and restores normal hand-adjustable altitude tension.

Tested and working

This version is physically installed and tested on my Apertura AD8.

My telescope is currently equipped with:

  • DobsonDream DSC/encoder system

  • RACI finder

  • 3D-printed telescope handling/slew handle

  • 2" 30 mm eyepiece

With this configuration, the replacement knob provides more than enough tension to prevent the telescope from drifting downward. In testing, the DobsonDream side alone can provide enough tension to hold the telescope in position.

Only light hand pressure is necessary. The knob is intended to adjust bearing friction, not lock the altitude axis solid.

Design notes

Clearance around the DobsonDream encoder is extremely tight. The dimensions around the center of the knob are therefore intentional and are close to the maximum size that will reliably clear the encoder hardware on my installation.

The final dimensions were refined using measurements taken directly from the original AD8 hardware and test fitting on the telescope.

The outside of the knob is shaped similarly to the original tension knob and is comfortable to grip and adjust by hand.

Tested print settings

My installed part was printed using:

  • Printer: Prusa XL

  • Nozzle: 0.4 mm

  • Material: Prusament PETG

  • Layer height: 0.10 mm

  • Perimeters: 2

  • Infill: 15%

  • Infill pattern: Gyroid

  • Top solid layers: 8

  • Bottom solid layers: 7

These settings have worked well for my installation. The knob does not require significant torque during normal use, so I have not found high infill necessary.

PETG is recommended for a durable functional part, although other materials may also work.

Fit and compatibility

Confirmed:

  • Apertura AD8

  • DobsonDream DSC altitude encoder installation

The Apertura AD8 is manufactured by GSO, and similar GSO Dobsonians may share compatible altitude hardware. However, I have only personally tested this design on my Apertura AD8.

If you try it on another GSO-based telescope, please leave a comment with your telescope model and whether any modifications were necessary.

Files included

I've included printable and editable formats so the design can be adjusted if necessary:

  • STL

  • 3MF

  • STEP

  • Fusion 360 source file

The STEP/Fusion files are particularly useful if your printer or telescope requires a small tolerance adjustment.

Installation and use

Install the replacement knob as part of the altitude tension assembly on the DobsonDream encoder side of the telescope.

Thread the knob on normally and tighten it only until you have the desired altitude resistance. Do not crank it down. Very little torque is necessary to provide useful tension.

On my AD8, roughly 1–3 turns through the useful adjustment range is sufficient to go from loose movement to enough tension to prevent unwanted altitude drift.

Feedback and remixes welcome

This solved a very specific problem with my own AD8/DobsonDream installation, so I'm sharing it in the hope that it saves another Dobsonian owner from having to design the same part from scratch.

If you print it, I'd love to know:

  • What telescope you're using

  • Which DobsonDream kit/encoder you're using

  • What material you printed it in

  • How the threaded fit was

  • Whether encoder clearance was correct

  • Whether you needed to modify any dimensions

Feel free to remix or improve it, and please share your results so we can document compatibility with other GSO Dobsonian models.

Clear skies!

Tagi