Apertura AD8 DobsonDream Tension Knob Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement tension knob for Apertura AD8 telescopes using a DobsonDream DSC encoder.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 26
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Apertura AD8 DobsonDream Altitude Tension Knob
This is a replacement altitude tension knob I designed for my Apertura AD8 Dobsonian after installing a DobsonDream DSC (Digital Setting Circles) encoder system.
Why I made this
The DobsonDream altitude encoder installation uses the same area as the AD8's original altitude tension hardware. There is very little clearance between the encoder, mounting hardware, and side of the telescope, making it difficult to retain a functional tension knob.
I wanted to keep the DobsonDream installed without losing the ability to adjust the telescope's altitude tension, so I designed this replacement knob specifically around the available space.
After several prototypes and measurements of the original hardware, this version fits my AD8 properly, clears the DobsonDream encoder assembly, and restores normal hand-adjustable altitude tension.
Tested and working
This version is physically installed and tested on my Apertura AD8.
My telescope is currently equipped with:
DobsonDream DSC/encoder system
RACI finder
3D-printed telescope handling/slew handle
2" 30 mm eyepiece
With this configuration, the replacement knob provides more than enough tension to prevent the telescope from drifting downward. In testing, the DobsonDream side alone can provide enough tension to hold the telescope in position.
Only light hand pressure is necessary. The knob is intended to adjust bearing friction, not lock the altitude axis solid.
Design notes
Clearance around the DobsonDream encoder is extremely tight. The dimensions around the center of the knob are therefore intentional and are close to the maximum size that will reliably clear the encoder hardware on my installation.
The final dimensions were refined using measurements taken directly from the original AD8 hardware and test fitting on the telescope.
The outside of the knob is shaped similarly to the original tension knob and is comfortable to grip and adjust by hand.
Tested print settings
My installed part was printed using:
Printer: Prusa XL
Nozzle: 0.4 mm
Material: Prusament PETG
Layer height: 0.10 mm
Perimeters: 2
Infill: 15%
Infill pattern: Gyroid
Top solid layers: 8
Bottom solid layers: 7
These settings have worked well for my installation. The knob does not require significant torque during normal use, so I have not found high infill necessary.
PETG is recommended for a durable functional part, although other materials may also work.
Fit and compatibility
Confirmed:
Apertura AD8
DobsonDream DSC altitude encoder installation
The Apertura AD8 is manufactured by GSO, and similar GSO Dobsonians may share compatible altitude hardware. However, I have only personally tested this design on my Apertura AD8.
If you try it on another GSO-based telescope, please leave a comment with your telescope model and whether any modifications were necessary.
Files included
I've included printable and editable formats so the design can be adjusted if necessary:
STL
3MF
STEP
Fusion 360 source file
The STEP/Fusion files are particularly useful if your printer or telescope requires a small tolerance adjustment.
Installation and use
Install the replacement knob as part of the altitude tension assembly on the DobsonDream encoder side of the telescope.
Thread the knob on normally and tighten it only until you have the desired altitude resistance. Do not crank it down. Very little torque is necessary to provide useful tension.
On my AD8, roughly 1–3 turns through the useful adjustment range is sufficient to go from loose movement to enough tension to prevent unwanted altitude drift.
Feedback and remixes welcome
This solved a very specific problem with my own AD8/DobsonDream installation, so I'm sharing it in the hope that it saves another Dobsonian owner from having to design the same part from scratch.
If you print it, I'd love to know:
What telescope you're using
Which DobsonDream kit/encoder you're using
What material you printed it in
How the threaded fit was
Whether encoder clearance was correct
Whether you needed to modify any dimensions
Feel free to remix or improve it, and please share your results so we can document compatibility with other GSO Dobsonian models.
Clear skies!