Modular 3.5" Hdd Cage & Caddy for Anti-Vibration screws
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I really liked the anti-vibration hard drive caddy and cage, but I wanted it to be bigger than 2 bays so I remixed it
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
I really liked Metatron's model, but I wanted to have more than 2 bays. I remixed this so I could have as many drives as I could fit in my case. This uses the same caddy as their model, but I changed the cage and added top and bottom pieces to the assembly, then I added holes on the sides to add filament for reinforcement. Each drive has about 36mm of height, and I can confirm that every drive I have fits comfortably. The front is pretty open for good airflow since many drives will benefit from active cooling, and in the picture I have the entire front of the case full of fans blowing through the cage.
I want to make a v2 that uses angled mating surfaces to avoid using supports. The step file is included for anyone who wants to remix
Print the mod_cage with supports and with the bottom on the build plate. The top and bottom pieces can be printed without support.