Hose Hanger for SHOPVAC hoses. Upscaled to 67mm (Oversize for 2.5")
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the original 2" (50mm) vac hose hanger upscaled 134% to fit the majority of SHOPVAC and other wet/dry vac hoses
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A double hanger for wet/dry vacuum hoses! For a 2" (50mm) hose, go to the original design, masterfully created by Peter H!
Your slicer may object, this should fit a 256x256x256 printer- but you may have to manually move it to fit your print bed as the size is 254.721 x 209.331 x 91.6771, depending upon the unprintable zones.
Orcaslicer would not automatically arrange this one on the plate.
I printed in PLA with 4 walls and 20% infill gyroid for strength. 12 hours and 40 minutes later....
This nicely fits a 2.5" vac hose (as many hoses are not exact in measurement, I oversized at 2.64" (67mm))