Hose Hanger for SHOPVAC hoses. Upscaled to 67mm (Oversize for 2.5")
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the original 2" (50mm) vac hose hanger upscaled 134% to fit the majority of SHOPVAC and other wet/dry vac hoses
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 26
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A double hanger for wet/dry vacuum hoses! For a 2" (50mm) hose, go to the original design, masterfully created by Peter H!
Your slicer may object, this should fit a 256x256x256 printer- but you may have to manually move it to fit your print bed as the size is 254.721 x 209.331 x 91.6771, depending upon the unprintable zones.
Orcaslicer would not automatically arrange this one on the plate.
I printed in PLA with 4 walls and 20% infill gyroid for strength. 12 hours and 40 minutes later....
This nicely fits a 2.5" vac hose (as many hoses are not exact in measurement, I oversized at 2.64" (67mm))