Vertical Phone Display Shelf (DIY Perks spoof)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Display phones on your shelf, retrieve them at will
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Public Domain
Based closely on the Mrwhosetheboss collab video: https://www.youtube.com/watch?v=sVc5szSrfIQ
Display phones on a shelf while keeping them ready and accessible. This model has 12 slots, 6 of them being a bit wider to fit thicker devices, and a printed spring to keep each phone in place. It's one-size-fits-all, accompanying 6mm-14mm thick devices in the different slots for my situation. There is also a thicker spring that would keep certain devices in the slot more firmly (Galaxy Nexus). The stand is split into 2 parts with a dovetail joint, to print on Ender-sized buildplates, and holes to insert 6x3 neodymium magnet discs on the bottom.
Certainly not the most impressive modeling techniques I was certainly winging it in Fusion for my specific setup here