Wallmounted electrical enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An enclosure to cover electrical connections. In my case an outlet for my solar panels.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 31
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
A wallmounted electrical enclosure.
I used to cover the outlet where my solar panels are connected. It also weatherproofed a smart plug which was only intendet to be used indoors. Working for 3 years now, no issues.
There is also a file for a seal which could be printed in TPU.
For the box itself i used Extrudr Greentec. (PETG might be fine as well)
If the bottom opening is not needed, a file for a plug is included as well.
To permanently close the enclosure you either need to insert three M4 threaded inserts into the bottom part, or you can also screw directly into the plastic.
WxHxD ~ 150x65x150 (Not including the hinges and the screws)
For mounting it to the wall itself there are 6 x M4 countersunk holes on the inside of the bottom part.