Anko Filament Dryer Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multi piece bolt together spacers to turn your cheap Anko (Kmart) dehydrator into a filament dryer.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Save some money and turn your Kmart/ Anko Dehydrator into a cheap and effective filament dryer. Great for getting moisture out of PLA and Nylon Filaments
Designed to keep the original drying racks without any modification/ destroying them, and stackable so multiple spools can be dried at the same time. Just print more spacers!
I would recommend printing with a filament with a higher temperature than your intended drying temp. Mine were printed with ABS with a 0.28 layer height, 2 wall count with 15% infill and they're pretty sturdy. Around 180g of filament used.
Print a total of 4 pieces and bolt together.
Requires:
4x 3mm heat set inserts
4x 3mm screws 10-15mm
Step file provided if you would like to modify the design.