Anko Filament Dryer Spacer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Multi piece bolt together spacers to turn your cheap Anko (Kmart) dehydrator into a filament dryer.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 24
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Save some money and turn your Kmart/ Anko Dehydrator into a cheap and effective filament dryer. Great for getting moisture out of PLA and Nylon Filaments
Designed to keep the original drying racks without any modification/ destroying them, and stackable so multiple spools can be dried at the same time. Just print more spacers!
I would recommend printing with a filament with a higher temperature than your intended drying temp. Mine were printed with ABS with a 0.28 layer height, 2 wall count with 15% infill and they're pretty sturdy. Around 180g of filament used.
Print a total of 4 pieces and bolt together.
Requires:
4x 3mm heat set inserts
4x 3mm screws 10-15mm
Step file provided if you would like to modify the design.