0x2a's Baseframe for Waveshare's 7inch ESP32S3 Touchscreen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Baseframe for Waveshare's "ESP32-S3-Touch-LCD-7 800x480 Pixels Rev1.2".
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This Baseframe for Waveshare's "ESP32-S3-Touch-LCD-7 800x480 Pixels Rev1.2" has a tight enough fit to look good from the front but also allow for some print imperfections.
Printed without supports and default settings (0.4 nose, 0.2 layer height, PETG)
The standoffs delivered with the screen can be used to fixate the casing and are still usable as can be seen in the pictures.
A slightly raised edge protects the screen from touching a surface if the assembly is placed face down on a desk.
The screen has some (<1mm) tolerances at the sides and behind the screen's edges to prevent delamination of the screen layers and allow for some flex of both components without hitting the other or scraping the walls.
Provides good access to the electronics on the back while protecting the screen
This model is meant to be a component of a bigger build. It can be used standalone but be aware that the standoffs are to short for some connectors when placing the assembly on the back.
The FreeCAD source file is also available packaged in a .zip-file so that it can be uploaded.
All connectors are reachable