1 / 4
Parkside vacuum cleaner PHSSA 20-Li D2 – Reinforced Dust Container Latch Repair — zdjęcie 1
1 / 4

Parkside vacuum cleaner PHSSA 20-Li D2 – Reinforced Dust Container Latch Repair

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Opening/latching mechanism for Parkside PHSSA 20-Li D2

Ocena
0 / 5
Polubienia
8
Pobrania
26
Wydruki
0
Wyświetlenia
173
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

The original opening/latching mechanism on our Parkside PHSSA 20-Li D2 cordless handheld vacuum cleaner broke during normal household use.

Instead of replacing the entire dust container or throwing the vacuum cleaner away, I designed this reinforced replacement latch. The new part is stronger than the original mechanism and should withstand repeated opening and closing much better.

Compatible with:

  • Parkside PHSSA 20-Li D2 cordless handheld vacuum cleaner

  • IAN 479370_2410

Printing recommendation:

  • Material: PETG or ASA recommended

  • PLA can also be used, but may be less durable

  • Use at least 4 perimeters/walls

  • Recommended infill: 40–100%

  • Print in the orientation shown in the uploaded project files

Installation:

The replacement latch must be secured using two small screws or a suitable strong adhesive. Choose the method that best suits your repair and make sure the latch is firmly attached before use.

Tagi