Wall Mount for QNAP 2-Bay NAS TS-251+
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount brackets designed for QNAP NAS TS-251+ or similar. NAS dimensions: Width 103mm, Length 220mm, Height 168mm
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
Motivation
[ compact wall mount for NAS ]
As a NAS always generates some minor noises, I wanted to store it "away" with a compact wall mount.
This also allows to "hide" the NAS and place it in a protected position on the wall.
The struts of the bracket allow cable guidance to the back side of the NAS.
The material recommended is PETG, as during usage the brackets have to support the NAS body.
The design allows printing without supports, but I recommend a 8mm brim.
Printed with SUNLU PETG (Black).
[ Wall mount brackets ]
1x Wall mount bracket left = WallMount_left_v00.stl
1x Wall mount bracket right = WallMount_right_v00.stl
(support: none)
(brim: recommended)
(print orientation: side face of bracket down)
(colour: Black or as you like ;-)
[ Drilling Template ]
1x Drilling Template = WallMount_DrillingTemplate_v00.stl
(support: none)
(brim: none)
(print orientation: front/backface of drilling template down)
(colour: Black or as you like ;-)
To save material, slice with massive layers top/bottom = 0, infill = 50%, infill = grid
Assembly
For convenient drilling at correct dimensions you can use the drilling template.
Happy printing!!!