Multiboard - Makita Battery Holder vLutz
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a Makita Battery holder for use with Multiboard.
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 1
- Wyświetlenia
- 49
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
It's a Makita Battery holder to be attached to the multiboard, parrt of the Multibuild system.
It has 2 parts:
The battery holder itself
The lock bolt, to better attach the holder onto the multiboard - It should be used with a M3 10mm bolt with triangle head (as in the pictures) to make sure it doesn't break when being bolted or break with the battery weight.
It can be printed out of PLA, PETG, ... but ideally, on an angle, as set in the file and using supports on specific places.
I had a good success using organic supports and painting on the handing horizontal areas only, to minimize filament waste.