Roland FP-10 E-Piano Headphone Holder – Wide Headband Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
“Roland FP-10 E-Piano Headphone Holder”, modified to better accommodate headphones with wider headbands.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
This is a remix of the original “Roland FP-10 E-Piano Headphone Holder”, modified to better accommodate headphones with wider headbands.
The original design is a practical headphone holder made specifically for the Roland FP-10 digital piano stand. It mounts directly onto the stand’s crossbar without screws, glue, or additional hardware and keeps the headphones conveniently within reach.
What Changed in This Remix?
The original headphone support area was too narrow for some larger headphones.
For this remix, the headphone support section has been extended to approximately 55 mm, making it suitable for headphones with headbands around 50 mm wide while providing a little extra clearance.
Apart from this modification, the original geometry and functionality have been retained as closely as possible.
Original Features Retained
Perfect Fit: Designed for the Roland FP-10 stand crossbar.
Tool-Free Mounting: Slides and swivels onto the stand without screws or glue.
Cable Management: Integrated cable guide keeps the headphone cable organized.
Jack Storage: Built-in slots provide a convenient place to store the headphone jack when not in use.
Clean Design: Simple and unobtrusive design that fits nicely with the piano.
Support-Free Printing: Designed to print without additional slicer-generated supports.
Remix Modification
Original headphone support width: approx. 35 mm
Remixed headphone support width: approx. 55 mm
Recommended for headbands: up to approx. 50 mm
The additional clearance makes inserting and removing wider or padded headphone bands easier.
Print Settings
The model is designed for straightforward 3D printing.
Printer: Prusa MK4 or comparable
Material: PLA
Layer Height: 0.2 mm
Infill: 15–20% Gyroid or Grid
Supports: No
Raft: No
Brim: No
Other materials such as PETG should also work well if additional flexibility or temperature resistance is desired.
Assembly Instructions
Mounting is quick and requires no screws or glue.
Remove the integrated sacrificial/support structure and carefully deburr the cable guide at the top of the hook.
Place the headphone cable into the integrated cable guide.
Position the bracket next to the crossbar of the Roland FP-10 stand.
Slide and swivel the hook onto the crossbar until it securely snaps into place.
Place your headphones onto the extended holder.
Credits
This model is a remix of the original Roland FP-10 E-Piano Headphone Holder.
All credit for the original design, mounting mechanism, cable management, and overall concept goes to the original creator.