Label for Ikea Komplement mesh basket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Label that fits securely over edge of Ikea KOMPLEMENT mesh basket drawer within PAX closet.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I added pegs so that the label fits securely with the mesh part of the Ikea Komplement mesh drawer for when the drawer is inside a PAX closet with doors. This label fits well over the Komplement drawer without making PAX doors stick out. It looks like it would also fit the Ikea Boaxel mesh drawers but I don't have those to test.
Slightly wider than the original. Can be used with the frame, but I prefer to just label with tape and a marker.
To attach to the drawer, tilt backwards so that pegs go into mesh and then push down. To release, tilt backwards. Does not work well with silk filament, but any other PLA filament should be fine.
Printed on MK4s
0.4mm nozzle
PLA
No supports