1 / 2
Kitty enclosure for reTerminal sticky — zdjęcie 1
1 / 2

Kitty enclosure for reTerminal sticky

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A cute, kitty-themed enclosure for the reTerminal Sticky from Seeed Studio.

Ocena
0 / 5
Polubienia
3
Pobrania
22
Wydruki
0
Wyświetlenia
256
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This enclosure is designed specifically for Sticky, the 3.97-inch AI-powered magnetic ePaper display from Seeed Studio. The compact snap-fit design keeps Sticky protected while maintaining easy access to the buttons and display.

Get your own reTerminal Sticky through this link 

Follow the steps below to assemble the enclosure.

Assembly Steps

1. Place the buttons
First, place all the buttons into their corresponding positions on the top body of the enclosure. Make sure each button is seated correctly and moves freely.

2. Place Sticky
Carefully place the Sticky device into the top body of the enclosure. Make sure the display, buttons, and other openings are properly aligned.

3. Slide on the back plate
Once Sticky is positioned correctly, take the back plate and slide it into the enclosure from the bottom. Slide it all the way until the back plate is fully seated and the enclosure is securely closed.

4. Glue the ear caps
Finally, apply a small amount of suitable adhesive to the ear caps and attach them to the enclosure. Hold them in position for a few seconds and allow the adhesive to fully cure before using the enclosure.

Tagi