Moto G6 Two-Piece Phone Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A two-piece Moto G6 case with a flexible inner shell and rigid outer options.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
A two-piece protective case designed for the Motorola Moto G6. The flexible inner shell fits inside a rigid outer shell, with both a plain outer version and a playful stick-figure variant included. The Fusion 360 source file is also provided.
Print the inner piece in a soft TPU or similar flexible filament. The outer shell was designed for PETG, though PLA or ABS may also work. The original creator used 0.15–0.20 mm layers, 20% infill, and no supports. After cleaning any TPU stringing, press the inner shell into the outer shell, then insert the phone button-side first and snap in the corners.
Originally designed by alpacapla and published on Thingiverse: