Desiccant Funnel for Prusa USS Drybox (Dry box)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A funnel for refilling the removable desiccant containers in the Prusa USS drybox.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 54
- Wydruki
- 4
- Wyświetlenia
- 202
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a funnel for filling the removable desiccant containers in the Prusa USS drybox. I cut down a lid and added a funnel to make pouring desiccant into the containers easier.
Print with a 0.4 mm nozzle, 0.15 mm layers, 3 perimeters and 100% infill. No supports needed. The walls are thin, so most of the print is made up of perimeters. My filament setup is PETG.
The STL is oriented for printing: broad funnel rim flat on the bed, narrow container-fitting end up. The photos show the funnel upright for use.
Based on the lid from Prusa Research’s USS Drybox printable accessories:
https://www.printables.com/model/1605113-prusa-uss-drybox-printable-accessories