SnapMaker U1 rear gasket Shim
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fills the small gap between the U1 Top Lid gasket and Machine around the rear connector. Some users will need this.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 7
- Wydruki
- 1
- Wyświetlenia
- 105
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This flat gasket (shim) mounts between extruder 2 and 3 at the rear of the unit around the top lid connector (see photos). It closes a potential leakage there between the lid gasket and the printer. Not everyone will need it, but I did (along with the feet that I published here and shared with Snapmaker R&D, who have now published their version here:
https://wiki.snapmaker.com/en/resource_hub/top_cover_seating?utm_id=97758_v0_s00_e0_tv4_a1dennhb87mf8c
Print with TPU (I used Gizmodorks TPU with the generic TPU settings), use a sufficiently thin layer height so you get the wings (which will mount under the screw holes of the extruder connectors 2 and 3 (see photo).
Happy printing (with less leaks)!