SnapMaker U1 rear gasket Shim
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fills the small gap between the U1 Top Lid gasket and Machine around the rear connector. Some users will need this.
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 7
- Makes
- 1
- Views
- 105
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This flat gasket (shim) mounts between extruder 2 and 3 at the rear of the unit around the top lid connector (see photos). It closes a potential leakage there between the lid gasket and the printer. Not everyone will need it, but I did (along with the feet that I published here and shared with Snapmaker R&D, who have now published their version here:
https://wiki.snapmaker.com/en/resource_hub/top_cover_seating?utm_id=97758_v0_s00_e0_tv4_a1dennhb87mf8c
Print with TPU (I used Gizmodorks TPU with the generic TPU settings), use a sufficiently thin layer height so you get the wings (which will mount under the screw holes of the extruder connectors 2 and 3 (see photo).
Happy printing (with less leaks)!