Parametric Universal Phone Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Customizable 2-Part Phone Case, made with OpenSCAD
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 1
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a Semi-Universal Phone Case Generator made with OpenSCAD. It comes together by using 4 screws, by default they're M2.5x10 Scews, but, that'll change according to your configuration.
This case was inspired by another case by @05WEL. But instead of simply making it for my phone, I opted to make it as customizable as I could, because our devices deserve a good protective case, regardless of age or gimmicks.
It's separated into Steps.
First your phone, it's measurements, the style and size of the camera
Then you base of the case, the size, phone clearance, back and front padding, the screw size
Then the front case, the screen cutout, adjusting for screen protectors and speakers
Then the cutouts, for buttons on each side, the ports at the bottom, vent holes, and optionally a headphone jack
If your phone has a 3D Model you can use as a reference, that'll help you immensely, as you can just take the model and test your configuration in OpenSCAD. Otherwise, I recommend using some measuring your phone manually. I'd personally print or draw the phone on a piece of paper, and take measurements there.
By default, the screws are set to M2.5x16, but you can adjust the size in the customizer
This is released as CC A-NC-SA, and the source code is available and open to contributions!