Battery Cover for Hunter Douglas PowerView Remote
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Their Customer Service wanted me to buy a new ~$70 remote instead of replacing a $0.10 piece of plastic.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
After dropping the "ergonomic" Pebble Remote about 100 times, one of the tabs broke off of the battery cover for my Hunter Douglas "PowerView" remote for the window shades. I tried to buy a replacement but Hunter Douglas's Customer Service rep wanted me to buy a new ~$70 remote instead of replacing a $0.10 piece of plastic. How disappointingly wasteful!
So this model is now free for non-commercial use. It includes a wide screw driver slot, and some more grippy bits for your fingers if a slot screw driver isn't close at hand.
Print 0.1mm layer height in PETG or stronger. The tabs will NOT work in PLA due to layer sheer... I've provided the 3MF/STL model and a sliced gcode for PETG. The original OEM battery cover was injection molded PC+ABS.
No supports needed, as the supports are included in the model. Wiggle the waste tabs off after printing, and you're good to go. Please comment if you have any problems or other printing advice.
If you're looking for a replacement for the wiggly, wobbly, slippery, and easy-to-drop "ergonomic" pebble remote holder, I like this one by Greg M.
Hunter Douglas corporate folks, in case you see this... Release models like these and you'll have a higher customer satisfaction rating as home fabrication becomes more mainstream. Embrace it before your competitors. PS. Please invest in quality engineering on your HomeKit integration too. The bridge is flaky!