Gridfinity Partsbin with Lids
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
parametric remix with FreeCAD With Gridfinity Addon
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I need some Bins with Lid for little Things like M3 Washer.
They have a habit of always hiding in other boxes.
Also a Scoop for a cheaper getting out of the box.
And it should be parametric.
Update 12.09.2026 I found a little Error in the FreeCAD-Sketch :-(
To configure is very simple in VarSet:
1x1x3 VarSet
Under VarSet you could change the first 3 Options, see it in the result in the next Picture:
1x1x3 Case without Lid
The last 4 Otions are internal Parameter for the Drawings. Don't change it.
Hints:
- The Parameter Grid_Z begins with a minimum with 2 and means the
Diameter "U" in Gridfinity.
- Somtimes I get a Warning but the STL-File is OK
Made with:
- CAD: FreeCAD 1.1.3, Addon Gridfinity
- 3mf: PrusaSlicer 2.9.6 for Prusa MK4S
- Nozzle: 0,4mm
- Layer: 0,2mm
- Support: No
- Filament: PETG or PLA
See also Partsbin for Nameplate: