Gridfinity Partsbin with Lids
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
parametric remix with FreeCAD With Gridfinity Addon
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 78
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
I need some Bins with Lid for little Things like M3 Washer.
They have a habit of always hiding in other boxes.
Also a Scoop for a cheaper getting out of the box.
And it should be parametric.
Update 12.09.2026 I found a little Error in the FreeCAD-Sketch :-(
To configure is very simple in VarSet:
1x1x3 VarSet
Under VarSet you could change the first 3 Options, see it in the result in the next Picture:
1x1x3 Case without Lid
The last 4 Otions are internal Parameter for the Drawings. Don't change it.
Hints:
- The Parameter Grid_Z begins with a minimum with 2 and means the
Diameter "U" in Gridfinity.
- Somtimes I get a Warning but the STL-File is OK
Made with:
- CAD: FreeCAD 1.1.3, Addon Gridfinity
- 3mf: PrusaSlicer 2.9.6 for Prusa MK4S
- Nozzle: 0,4mm
- Layer: 0,2mm
- Support: No
- Filament: PETG or PLA
See also Partsbin for Nameplate: