1 / 3
Beyblade X Display Stand — 3D Printed Holder for complete Bays — zdjęcie 1
1 / 3

Beyblade X Display Stand — 3D Printed Holder for complete Bays

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

1,2 or 3 Beyblade X stand

Ocena
0 / 5
Polubienia
1
Pobrania
15
Wydruki
0
Wyświetlenia
93
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Beyblade X display stands in three sizes: 1-bay, 2-bay, and 3-bay.

The Bey sits on the stand. The blade rests on the rim. The bit drops through a hole. Nothing grips the bit. Pick the whole Bey up when you want it.

Made for assembled Beyblade X (BX / UX style bits). Most standard bits clear the hole. Oversized or odd bits may not. Print the 1-bay first if you want to check fit.

Not affiliated with Hasbro or Takara Tomy.

Print

  • Flat on the bed, hole facing up

  • No supports

  • 0.2 mm layer

  • 0.4 mm nozzle

  • 3 walls

  • 15–20% infill is enough

  • PLA is fine for a shelf. PETG if it lives on a kid desk.

Fit

Hole is sized so a normal X bit passes through and the blade lands on the top face. If your first print is tight on the blade or the bit rubs, scale XY 101% or open the hole 0.2–0.4 mm in the CAD.

Tagi