SpacePi stacking silica drying trays (fast prints)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small, stacking trays with vents to allow easy drying of silica beads in a Creality SpacePi
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These drying trays use a weaved design I have first seen in this model by Kie. This allows for very fast printing of meshed sidewalls with nearly zero retractions. A very elegant design that I copied for this model. I designed it for 0.6mm nozzles, but it should print fine with 0.4mm as well (3 lines instead of 2).
I recommend 20% honeycomb with 0 top and bottom layers to get a nice mesh bottom with holes small enough the silica beads will not fall through.
Up to 6 of these trays can be stacked inside a SpacePi. Drying a total of 2kg of silica beads took me three runs of six trays each, and one tray contains roughly the amount of beads I usually use per spool container (hence the rather small size of the trays).