SpacePi stacking silica drying trays (fast prints)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small, stacking trays with vents to allow easy drying of silica beads in a Creality SpacePi
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 79
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
These drying trays use a weaved design I have first seen in this model by Kie. This allows for very fast printing of meshed sidewalls with nearly zero retractions. A very elegant design that I copied for this model. I designed it for 0.6mm nozzles, but it should print fine with 0.4mm as well (3 lines instead of 2).
I recommend 20% honeycomb with 0 top and bottom layers to get a nice mesh bottom with holes small enough the silica beads will not fall through.
Up to 6 of these trays can be stacked inside a SpacePi. Drying a total of 2kg of silica beads took me three runs of six trays each, and one tray contains roughly the amount of beads I usually use per spool container (hence the rather small size of the trays).