1 / 2
Toyota 4Runner / Hilux Surf aftermarket speaker adapter brackets — zdjęcie 1
1 / 2

Toyota 4Runner / Hilux Surf aftermarket speaker adapter brackets

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sturdy brackets for installing aftermarket speakers to the doors.

Ocena
0 / 5
Polubienia
1
Pobrania
9
Wydruki
0
Wyświetlenia
76
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

These brackets can be used to install aftermarket speakers to a 4th gen Toyota 4Runner / Hilux Surf 2003-2009 (N210).

The design is extra sturdy so that PLA can be considered as well. The brackets support standard size 6x9" and 6,5"speakers. The tweeter bracket has a 65mm (approximately 2 9/16") hole with a 76mm spacing for 3mm screws to fit a larger tweeter. 
No modifications to the door nor the door trim should be necessary, however, to be sure of the clearances the fitment should be checked before installation. The speakers I used for reference are Alpine S2-S69C and Alpine S2-S65 which fit without an issue (the dimensions can be found online). 

It is highly recommended to add soft insulation between the bracket and the door to avoid any vibrations. 
The speakers wiring must be routed through the back or a hole must be drilled afterwards or added to the bracket in the slicer. Make sure to clear the window if routed through back. 
Check the orientation before installing the brackets so that the skirt covers the door hole completely.
Original screws can be used to install the brackets. 

Tagi