Fender for Bicycle Trailers of Homcom or Vevor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fender for the 16" wheels of the Homcom 2-in-1 Cargo Trailer and identical models sold under brands Vevor, FCO, Tiggo
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I printed the fenders in a horizontal orientation with 15% infill and 4 perimeter layers without supports; and the brackets in vertical orientation with 30% infill, plus supports for the screw holes. PLA, PETG, or PCTG should work well.
You will also need
4 x flat-head screws, 4x10 mm
8 x flat-head screws, 4x6 mm (4x8 if using washers or snap rings)
8 x M4 square nuts
4 x M4 self-locking nuts
GERMAN
Die Schutzbleche selbst habe ich liegend mit 15% Infill und 4 Perimeterschichten ohne Supports gedruckt; die Halter stehend mit 30% Infill und Supports für die Schraubenlöcher. PLA, PETG oder PCTG sollten gut funktionieren.
Benötigt werden außerdem
4 St. 4x10 mm Schrauben mit flachem Kopf
8 St. 4x6 mm Schrauben mit flachen Kopf (4x8 bei Verwendung von Unterlegscheiben oder Sprengringen)
8 St. Vierkantmuttern M4
4 St. selbstsichernde Muttern M4