1 / 3
Fender for Bicycle Trailers of Homcom or Vevor — image 1
1 / 3

Fender for Bicycle Trailers of Homcom or Vevor

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Fender for the 16" wheels of the Homcom 2-in-1 Cargo Trailer and identical models sold under brands Vevor, FCO, Tiggo

Rating
0 / 5
Likes
1
Downloads
6
Makes
0
Views
97
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I printed the fenders in a horizontal orientation with 15% infill and 4 perimeter layers without supports; and the brackets in vertical orientation with 30% infill, plus supports for the screw holes. PLA, PETG, or PCTG should work well.

You will also need

4 x flat-head screws, 4x10 mm

8 x flat-head screws, 4x6 mm (4x8 if using washers or snap rings)

8 x M4 square nuts

4 x M4 self-locking nuts

GERMAN

Die Schutzbleche selbst habe ich liegend mit 15% Infill und 4 Perimeterschichten ohne Supports gedruckt; die Halter stehend mit 30% Infill und Supports für die Schraubenlöcher. PLA, PETG oder PCTG sollten gut funktionieren.

Benötigt werden außerdem

4 St. 4x10 mm Schrauben mit flachem Kopf

8 St. 4x6 mm Schrauben mit flachen Kopf (4x8 bei Verwendung von Unterlegscheiben oder Sprengringen)

8 St. Vierkantmuttern M4

4 St. selbstsichernde Muttern M4

Tags