1 / 3
Bolt holder for loose ISIS crank bolt — zdjęcie 1
1 / 3

Bolt holder for loose ISIS crank bolt

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Keeps a loose 15x1mm ISIS crank bolt with the crank for cranks/bolts without a self extractor

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
20
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Quick and simple little model that can hold an ISIS 15x1mm crank bolt - keeps it with the crank for storage.

Not needed if you have a self extracting crank bolt as the extractor cap keeps the bolt captive, but if you've got cheaper cranks without the self extractor, this is a handy way to store the cranks and the bolt together.

Printed in PETG at 0.2mm layer height, 3 shells. Higher layer height might compromise the quality of the threads, so I'd avoid that, but otherwise, anything goes. Should thread in easily. No supports necessary.

Tagi