Bolt holder for loose ISIS crank bolt
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Keeps a loose 15x1mm ISIS crank bolt with the crank for cranks/bolts without a self extractor
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 20
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Quick and simple little model that can hold an ISIS 15x1mm crank bolt - keeps it with the crank for storage.
Not needed if you have a self extracting crank bolt as the extractor cap keeps the bolt captive, but if you've got cheaper cranks without the self extractor, this is a handy way to store the cranks and the bolt together.
Printed in PETG at 0.2mm layer height, 3 shells. Higher layer height might compromise the quality of the threads, so I'd avoid that, but otherwise, anything goes. Should thread in easily. No supports necessary.