Storage Capsule Japandi Style
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This heavy-duty, weatherproof storage container features an innovative sealing mechanism
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 134
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This heavy-duty, weatherproof storage container is designed for outdoor enthusiasts, EDC setups, and workshop organization. It features a robust screw thread, a wide carabiner attachment loop, and an innovative sealing mechanism.
The Special Feature: No TPU Printing Required!
You don't need a multi-material setup or a TPU print profile to make this container weatherproof. The cap uses a custom-engineered groove designed to fit a standard 1.75 mm TPU (or flexible) filament strand as a gasket!
Key Features
Smart Gasket System: Uses a cut length of standard 1.75 mm TPU filament as an O-ring seal.
Carabiner Friendly: Reinforced top loop for easy attachment to backpacks, belts, or outdoor gear.
Enhanced Grip: Vertical ribbing along the body ensures easy opening even with wet hands or gloves.
100% Support-Free: Optimized geometry for clean, hassle-free FDM printing.
Gasket Assembly & Preparation
Cut the Filament: Cut a piece of 1.75 mm TPU filament to exactly 264 mm (based on the internal groove diameter of 82.25 mm).
Bevel the Ends: For a seamless seal, cut both ends at a 45° angle where they join.
Insert & Glue: Press the strand firmly into the inner groove of the cap. A tiny drop of PU contact adhesive or CA glue with primer holds it permanently in place.