1 / 1
HDD Sled/Rack/Mount/Bracket for HP Vectra
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hard drive sled for HP Vectra computers. I made it for the Vectra 486/33M, but it should fit similar 486 and 386.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
A hard drive sled compatible with HP Vectra computers. I made it for the Vectra 486/33M, but it should fit similar 486 and 386 models. The model is optimized for 3D printing, so it doesn’t have thin tabs for the hinge (the original is made of stamped sheet metal); instead, it slide into place. Additionally, it uses the side screw holes instead of the ones on the bottom of the drive, as in the original.
