HP NetServer SCSI SCA Drive Caddy Faceplate Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement static front face for HP NetServer SCSI drive tray 5182-4544
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a replacement faceplate for HP SCSI SCA hot swap drive tray #5182-4544 and similar. The overengineered latching mechanism snaps easily when forced. This model replaces the entire plate and provides a static finger ring to pull the tray out by.
To keep the face from spinning, the original hole for the latch has a backer plate that anchors the faceplate and provides extra strength for the finger ring. Hole is sized for the same heat set insert and a countersunk M3 screw but I just used a self tapping type of similar size.
Also note there is no cutout in the bottom for the locking bar. I don't need it but if someone else does, let me know. You can also just cut out the section needed manually as well.
Materials used:
1x M3 5x4.2 heat set insert
1x M3x10mm screw
1x Coarse thread self tapping screw (approx 10mm)