HP NetServer SCSI SCA Drive Caddy Faceplate Replacement
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement static front face for HP NetServer SCSI drive tray 5182-4544
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 24
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
This is a replacement faceplate for HP SCSI SCA hot swap drive tray #5182-4544 and similar. The overengineered latching mechanism snaps easily when forced. This model replaces the entire plate and provides a static finger ring to pull the tray out by.
To keep the face from spinning, the original hole for the latch has a backer plate that anchors the faceplate and provides extra strength for the finger ring. Hole is sized for the same heat set insert and a countersunk M3 screw but I just used a self tapping type of similar size.
Also note there is no cutout in the bottom for the locking bar. I don't need it but if someone else does, let me know. You can also just cut out the section needed manually as well.
Materials used:
1x M3 5x4.2 heat set insert
1x M3x10mm screw
1x Coarse thread self tapping screw (approx 10mm)