RC 3ronco Side Mounts (Jerry Can + Traction Boards)

Simple and functional side accessory mounts for the fully 3D-printed RC crawler 3ronco by Casadia. These mounts attach directly to the existing holes on the original roof rack – no drilling or modifications required.

How it works:

• Traction Boards: The mount is designed to fit the original traction boards included in the Casadia 3ronco kit. The boards simply snap into place.

• Jerry Can: The 3D model of the scale jerry can is included for free in this model files. It is secured to the mount using two rotary twist locks, allowing for quick tool-less removal on the trail.

🛠 Hardware Required:

For the Traction Boards Mount (per side):

• 2x M2x8 screw (to connect the main mount with the spacer)

• 2x M2x12 screw (to attach the assembly onto the roof rack)

For the Jerry Can Mount (per side):

• 2x M2x16 screw (to secure the rotary locks from the back side)

• 2x M2x8 screw (to connect the main mount with the spacer)

• 2x M2x12 screw (to attach the assembly onto the roof rack)

📝 Assembly Instructions (Jerry Can Mount):

1. Rotary Locks: First, secure the two rotary locks to the mount using M2x16 screws inserted from the back side of the mount.

2. Spacer: Align the mount with the spacer and connect them together using two M2x8 screws.

3. Mounting to the Rig: Place the completed assembly against the side of the roof rack and secure it into the rack holes using two M2x12 screws.

(For the traction boards mount, simply skip the first step regarding the locks).

🖨 Print Settings:

• Material: PETG or ASA. Highly recommended over PLA due to the flexibility for the snap-fit mechanism

• Layer Height: 0.15 mm.

• Infill: 20% for optimal strength.

• Supports: Not required.