Cellphone clicker fidget with buttons and switch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If they want to call you for a smalltalk by a smallphone
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
Model of a phone for my daughter so she can call me and use me as an elevator. Clicker included so it can be used to play with it(use it many times before it will become crisp). None of the 3D-printed springs worked well for me, so there are two options: 1. Keep the button assembly as a single piece. In this case, the buttons will not be pressable. 2. Cut the buttons apart (or print them separately) and use foam behind them. For example, I cut one Nerf dart into six pieces and inserted them into the button compartments. Then apply a thin layer of glue to the areas shown in the picture, press the base and cover with buttons together firmly (for example, in a vise), and wait for the glue to dry. If you are careful not to use too much glue, all buttons should remain fully functional. Just put there enough flexible material behind them. 4 locks are needed.