Korg Volca Desk Stand - 15 degree tilt, no supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Angled desk stand for the Korg Volca series. Built to the published 193 x 115 x 45 mm. No supports needed.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 26
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
An angled desk stand for the Korg Volca series. It lifts the unit to about 15 degrees so the knobs and sequencer face you instead of the ceiling, and catches it on a front lip. Nothing to install - it stands on the desk.
WHAT IT IS BUILT TO
Korg's published Volca dimensions: 193 x 115 x 45 mm. The stand is 198 x 119 x 32 mm overall with 1.5 mm of clearance. Those numbers are here so you can measure your own unit and check the fit before you print - the Volca chassis is shared across beats, bass, keys, sample and the rest, so one stand fits the family.
PRINTING
No supports, prints flat on the base. PETG at 0.2 mm, 3 perimeters, 15% infill comes out around 51 g. The side rails are narrow on purpose: this carries a 370 g synth at rest, not a shelf load, and the cross tie keeps them from splaying.
HONEST NOTES
The geometry is parametric - generated from the device's outer box by a script rather than sculpted. That is why the fit is predictable and why every dimension can be stated. It is a simple shape and makes no claim to be more.
I also sell these printed and posted at datum.parts for people without a printer. If you have one, print it - that is what this file is for.
