3dprinter Lid Under Shelf Storage (fusion360)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hanger system to store a 3d printer lid underneath a shelf/desk/...
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
The fusion file is provided would you want to see how it was made or simply edit the model easily.
This model consists of several parts: a holder, 2 types of plugs and a pad. You will need (at least) 4 prints of this model with each print needing one of each part except for the plugs of which you need 2.
The plugs are interchangeable, use the one you need at the right place. The small one is just to cover the hole while the blocking one is meant to block the lid from sliding past it. The pad is meant for a more softer material like TPU to protect your lid and to add friction (you could replace this part with felt strips if your prefer).
By default you will need 4mm screws but you can adjust this in the fusion file if needed
Printing information:
Print all parts like they came
No supports are needed except for the tpu pads that need regular supports.
A brim can help ensure that the parts don't get dislodged while printing.
While it doesn't need to hold a lot of weight, I still recommend printing most of the model in a slightly stronger filament like PETG, the pads are meant to use TPU.