1 / 3
Melee Quieter 4C holder for SVbony SV241 pro powerbox — zdjęcie 1
1 / 3

Melee Quieter 4C holder for SVbony SV241 pro powerbox

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple plate to assemble the Melee Q4C PC onto a SVBony SV241 pro powerbox.

Ocena
5 / 5
Polubienia
3
Pobrania
21
Wydruki
1
Wyświetlenia
82
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

A simple design that lets air space for passive cooling. The PC can however still be warm so it is best to use PETG or better heat resistant filament (PLA not recommended).

For assembly

- On the PC side : 2 standard computer hard drive screws

- On the SV241pro side : You well need to remove the four stock screws on the SV241pro top plate (no need to open the device....) and use longer ones (4 x M2.5*8mm) in place.

If you like this design, please like to encourage me :)

Clear Nights

Tagi